-->

Thursday, May 31, 2018

Physical vapor deposition - Wikipedia
src: upload.wikimedia.org

Physical vapor deposition (PVD) describes a variety of vacuum deposition methods which can be used to produce thin films and coatings. PVD is characterized by a process in which the material goes from a condensed phase to a vapor phase and then back to a thin film condensed phase. The most common PVD processes are sputtering and evaporation. PVD is used in the manufacture of items which require thin films for mechanical, optical, chemical or electronic functions. Examples include semiconductor devices such as thin film solar panels, aluminized PET film for food packaging and balloons, and titanium nitride coated cutting tools for metalworking. Besides PVD tools for fabrication, special smaller tools (mainly for scientific purposes) have been developed.

The source material is unavoidably also deposited on most other surfaces interior to the vacuum chamber, including the fixturing used to hold the parts.


Video Physical vapor deposition



Examples

  • Cathodic Arc Deposition: In which a high-power electric arc discharged at the target (source) material blasts away some into highly ionized vapor to be deposited onto the workpiece.
  • Electron beam physical vapor deposition: In which the material to be deposited is heated to a high vapor pressure by electron bombardment in "high" vacuum and is transported by diffusion to be deposited by condensation on the (cooler) workpiece.
  • Evaporative deposition: In which the material to be deposited is heated to a high vapor pressure by electrical resistance heating in "high" vacuum.
  • Pulsed laser deposition: In which a high-power laser ablates material from the target into a vapor.
  • Sputter deposition: In which a glow plasma discharge (usually localized around the "target" by a magnet) bombards the material sputtering some away as a vapor for subsequent deposition.
  • Pulsed electron deposition: In which a highly energetic pulsed electron beam ablates material from the target generating a plasma stream under nonequilibrium conditions.
  • Sublimation sandwich method: Used for creating man-made crystals.

Various thin film characterisation techniques can be used to measure the physical properties of PVD coatings, such as:

  • Calo tester: coating thickness test
  • Nanoindentation: hardness test for thin-film coatings
  • Pin on disc tester: wear and friction coefficient test
  • Scratch tester: coating adhesion test
  • X-ray micro-analyzer: investigation of structural features and heterogeneity of elemental composition for the growth surfaces

Maps Physical vapor deposition



Comparison to other deposition techniques

Advantages

  • PVD coatings are sometimes harder and more corrosion resistant than coatings applied by the electroplating process. Most coatings have high temperature and good impact strength, excellent abrasion resistance and are so durable that protective topcoats are almost never necessary.
  • Ability to utilize virtually any type of inorganic and some organic coating materials on an equally diverse group of substrates and surfaces using a wide variety of finishes.
  • More environmentally friendly than traditional coating processes such as electroplating and painting.
  • More than one technique can be used to deposit a given film.

Disadvantages

  • Specific technologies can impose constraints; for example, line-of-sight transfer is typical of most PVD coating techniques, however there are methods that allow full coverage of complex geometries.
  • Some PVD technologies typically operate at very high temperatures and vacuums, requiring special attention by operating personnel.
  • Requires a cooling water system to dissipate large heat loads.

Physical Vapor Deposition (Magnetron Sputtering) - YouTube
src: i.ytimg.com


Applications

As mentioned previously, PVD coatings are generally used to improve hardness, wear resistance and oxidation resistance. Thus, such coatings are used in a wide range of applications such as:

  • Aerospace
  • Automotive
  • Dies and moulds for all manner of material processing
  • Cutting tools
  • Firearms
  • Optics
  • Watches
  • Thin films (window tint, food packaging, etc.)
  • Darts barrels
  • Metals (aluminium, copper, bronze, etc.)

Physical vapor deposition | Ústav materiálov a mechaniky strojov
src: www.umms.sav.sk


Decorative applications

By varying the gases and duration of process, a range of colours are produced by Physical Vapour Deposition on stainless steel. The resulting coloured stainless steel product can appear as brass, bronze and other metals or alloys. This PVD coloured stainless steel can be used as exterior cladding for buildings and structures, such as the Vessel sculpture in New York City and The Bund in Shanghai. It is also used for interior hardware, panelling and fixtures.


Physical Vapor Deposition High Vacuum Magnetron Sputtering Coating ...
src: img.diytrade.com


See also

  • HPCVD
  • Chemical vapor deposition
  • Ion plating
  • Thin-film deposition
  • Ion beam-assisted deposition

The silicon substrate and adding to itâ€
src: slideplayer.com


Notes


File:Electron Beam Deposition 001.jpg - Wikimedia Commons
src: upload.wikimedia.org


References


NASA Glenn's Plasma Spray-Physical Vapor Deposition Rig - YouTube
src: i.ytimg.com


External links

  • Society of Vacuum Coaters
  • PVD Animation--an animation of a generic PVD sputter tool
  • Physical vapor deposition

Source of article : Wikipedia