-->

Thursday, February 1, 2018

Are Teflon (Non Stick) Pans Safe To Cook In?
src: plantbasedu.com

A non-stick surface is a surface engineered to reduce the ability of other materials to stick to it. Non-stick cookware is a common application, where the non-stick coating allows food to brown without sticking to the pan. Non-stick is often used to refer to surfaces coated with polytetrafluoroethylene (PTFE), a well-known brand of which is "Teflon." In the twenty-first century other coatings have been marketed as non-stick, such as anodized aluminium, ceramics, silicone, enameled cast iron, and seasoned cookware.


Video Non-stick surface



History

Ancient Greece

The Mycenaean Greeks might have used non-stick pans to make bread more than 3,000 years ago. Mycenaean ceramic griddles had one smooth side and one side covered with tiny holes. The bread was probably placed on the side with the holes, since the dough tended to stick when cooked on the smooth side of the pan. The holes seemed to be an ancient non-sticking technology, ensuring that oil spread evenly over the griddle.

Modern development

The modern non-stick pans were made using a coating of Teflon (polytetrafluoroethylene or PTFE). PTFE was invented serendipitously by Roy Plunkett in 1938, while working for a joint venture of the DuPont company. The substance was found to have several unique properties, including very good corrosion-resistance and the lowest coefficient of friction of any substance yet manufactured. PTFE was first used to make seals resistant to the uranium hexafluoride gas used in development of the atomic bomb during World War II, and was regarded as a military secret. Dupont registered the Teflon trademark in 1944 and soon began planning for post-war commercial use of the new product.

By 1951 Dupont had developed applications for Teflon in commercial bread and cookie-making; however, the company avoided the market for consumer cookware due to potential problems associated with release of toxic gases if stove-top pans were overheated in inadequately ventilated spaces. While working at DuPont, NYU Tandon School of Engineering alumnus John Gilbert was asked to evaluate a newly- developed material called Teflon. His experiments using the fluorinated polymer as a surface coating for pots and pans helped usher in a revolution in non-stick cookware.

A few years later, a French engineer had begun coating his fishing gear with Teflon to prevent tangles. His wife Colette suggested using the same method to coat her cooking pans. The idea was successful and a French patent was granted for the process in 1954. The Tefal company was formed in 1956 to manufacture non-stick pans.

Not all non-stick pans use Teflon; other non-stick coatings have become available. For example, a mixture of titanium and ceramic can be sandblasted onto the pan surface, and then fired at 2,000 °C (3,630 °F) to produce a non-stick ceramic coating.


Maps Non-stick surface



Polymer coating

Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer used in various applications including non-stick coatings. Teflon is a brand of PTFE, often used as a generic term for PTFE. The metallic substrate is roughened to promote adhesion, and layers of PTFE, from one to seven, are sprayed or rolled on, with a larger number of layers and spraying being better. The number and thickness of the layers and quality of the material determine the quality of the non-stick coating. Better-quality coatings are more durable, and less likely to peel and flake, and keep their non-stick properties for longer. Any PTFE-based coating will rapidly lose its non-stick properties if overheated; all manufacturers recommend that temperatures be kept below, typically, 260 °C (500 °F).

Health concerns

When pans are overheated beyond approximately 350 °C (660 °F) the PTFE coating begins to dissociate, releasing byproducts (PFOA) which can cause polymer fume fever in humans and can be lethal to birds. Concerns have been raised over the possible negative effects of using PTFE-coated cooking pans.

Processing of PTFE in the past used to include Perfluorooctanoic acid (PFOA) as an emulsifier; however, PFOA is a persistent organic pollutant and poses both environmental and health concerns, and is now being phased out of use in PTFE processing.

PTFE flakes that come off PTFE cookware poses no danger when ingested. This is because PTFE flakes are inert so they will travel through the body without being absorbed.


Big flying pan with non-stick surface isolated on white background ...
src: c8.alamy.com


Uses and limitations

With other types of pans, some oil or fat is required to prevent hot food from sticking to the pan's surface. Food does not have the same tendency to stick to a non-stick surface; pans can be used with less, or no, oil, and are easier to clean, as residues do not stick to the surface.

Utensils used with PTFE-coated pans can scratch the coating, if the utensils are harder than the coating; this can be prevented by using non-metallic (usually plastic or wood) cooking tools.

According to writer Tony Polombo, pans that are not non-stick are better for producing pan gravy, because the fond (the caramelized drippings that stick to the pan when meat is cooked) sticks to them, and can be turned into pan gravy by deglazing them--dissolving them in liquid.


Electric Skillet 16 Inch Non Stick Surface Stainless Steel Frying ...
src: res.cloudinary.com


See also

  • Cooking spray
  • Electroless nickel plating
  • LiquiGlide
  • Silverstone (plastic)
  • Teflon (trademark)

The Side View Of The Red Pan With A Nonstick Surface Stock Photo ...
src: previews.123rf.com


References


Lavohome 7 Mini Donut Maker Smart Electric Non Stick Surface ...
src: s-media-cache-ak0.pinimg.com


External links

  • How non-stick pan works
  • "Science plans 'non-stick' submarine", bbc.co.uk, 10 October, 2003
  • "'Virtually non-stick' gum created", Rebecca Morelle and Liz Seward, BBC News, 13 September 2007
  • How non-stick surface works- Illustration, from How Stuff Works.

Source of article : Wikipedia